MGUARD : Theft Recovery Solition For Jave Phones

mGuard is a anti theft software
for java enable mobile phones. It provides protection and safety from
theft or losing your device and helps to retrieve it back. Now the
users can forget the fear of losing their device by protecting it using
mGuard java Software. As of now, mGuard is the world’s only Theft
Recovery Software for Java phones. This software is specailly design
for Sony Ericsson phones but you can try it on any java enable mobile
phones.

Main Features of mGuard: Worlds First Theft Recovery Solution for Java Phones SMS notification on SIM Change to predefined number Does not affect mobile performance in normal operation Complete Stealth operations Tiny installation footprint Easy Configuration Settings Password Protected

Some Screenshots of mGuard:

You can download free mGuard software to your PC and then transfer it to your phone. To download click here: Download mguard antitheft
You
have to fill a little form and it send a link to download mGuard on
your mail id. Then register to get a free unlock code for mGuard. This
is also send to your mail id.

CDMA Mobile Phone Secret Codes

Here I provides to you secret codes for most types of CDMA Mobile Phones.
Hope
they'll helps you to solve out your problem to CDMA technology. Most
common CDMA phone models available here and rest you got soon.

Nokia:
5185/6185 programming: *3001#12345#
Software version: *#837# or *#VER# or *#9999#
Serial / ESN: *#92772689# or *#WARRANTY#
Phone reset: *#75681# or *#75682#

Nokia 6185-5170
1. Press *#639#
2. Enter OTKSL and press OK
3. Enter the MIN and select OK
4. Enter the SID and select OK
5. Programming is complete

Nokia 3585
1. Enter ## followed by the OTKSL
2. Number (MDN) is highlighted. Press the upper left-hand soft key to select
3. Mobile Number will display. Enter the 10 digit MIN
4. Press OK
5. IMSI will appear. Press and hold the Clear key until the display is empty.
6. Enter 31000 plus the MSID (15 digits total)
7. Press the upper left hand soft key and select OK
8. It will take you back to the SVC Programming. Press the upper right hand soft key to select EXIT
9. Press END.
10. Phone will power cycle and programming is complete.

Samsung:
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##
Samsung A500
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete
Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming
Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle
Samsung i300
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
Samsung A400 and A460
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle
Samsung 3500 8500 6100 N200
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete

Qualcomm:
QCP-800 programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
QCP-820/1920/2035: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
QCP 1960 and 2760
1. Press softkey under the work MENU
2. Press 8 0
3. Enter the OTKSL
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete

LG:
LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key
LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete
LG5350
1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key

TP 2100
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete
TP3000
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is required)
7. Programming is complete
TP 5250
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete
LG V111(DM110)
[menu]30.
After ask lockcode, enter: 843691.

Ericsson:
Programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu

Hyundai:
HGC-120E / -130E programming: #86904**89397#
HGC-600E programming: ##20022002, END and enter SPC: "000000" or may be other SPC typed by user.

Sony:
CM-M1300/3300/Z200 programming: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
Sony CM-M1300
1. Power phone on
2. Enter six "1s" ( 111111 )
3. Press the jog dial in
4. Press the jog dial in again to select programming
5. Enter six "0s" for the service security code
6. Phone displays the ESN
7. Press the jog dial in for OK
8. Enter your ten digit cellular telephone number
9. Press the jog dial in for OK
10. Enter your cellular carrier’s system ID (SID) without the zeros
(Example: if your carrier’s system ID is 00035, enter just 35)
11. Press the jog dial in for OK
12. Enter a name for NAM 1 or just press the jog dial in for OK
13. Phone displays Basic NAM 1 Programming is complete
14. Press the jog dial in
15. Press the jog dial in again for EXIT
16. Phone powers itself off
17. Press the power button to power the phone back on
18. Basic programming is complete

Motorola:
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)

Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The “User Activation” screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The “User Activation” screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key

Motorola Phones (ALL)
1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again - programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.

SK Teletech:
SK-IM 1000/1400/2000/2200/2400 programming: #7583538324#626#

Getrun 2000
System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)

NEOPOINT:
Neopoint 1000
1. Press M to display Main Menu
2. Scroll to PREFERENCES
3. Press softkey under SELECT
4. Enter 040793
5. Scroll to PROGRAMMING
6. Press softkey under SELECT
7. Enter OTKSL
8. Press softkey under DONE
9. Scroll to PHONE NUMBER
10. Enter 10 digit MIN
11. Scroll to HOME SID
12. Enter SID (4654)
13. Press softkey under SAVE to exit
14. Programming is complete
NEOPOINT 1600
1. Power the phone on
2. Press the "Menu" key
3. Scroll to "Preferences" - press "Select"
4. Key in the "Field Service Code" (the phone will not prompt you for the code)
at the "preferences" screen to access the "Service" menu (Default code is "000000")
5. Scroll to "Programming" - press "Select" - the phone will ask for the "Subsidy Lock Code"
6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
7. Select the NAM to be programmed (NAM 1 or NAM 2)
8. Program the NAM - Phone number and CDMA Home SID
9. After programming has been completed press "Save" - the phone will reset

Audiovox:
Audiovox 9100
1. Press ##
2. Enter the OTKSL
3. Display will read Service/Menu 1 Basic…press OK
4. Next screen will read Service Mode/Home SID…press OK
5. Next screen will read Service Mode/Home SID…press OK
6. Device will display Service Menu 1. Basic #
7. Press END button to complete programming

Handspring TREO:
1. Open the flip and press the PHONEBOOK button one time to display the dial pad
2. Enter ## and the OTKSL using the numbers on the Dial Pad
3. Press the handset button shown in the diagram above
4. At the Activations screen enter the MIN in the phone number field using the numbers on the device keyboard
5. Put a check in the Enable Number Portability box and type the MSID in the MSIN field
6. Press OK
7. The device will display the network search pop-up and return to the Phonebook display

Hitachi P300:
1. Enter ## and the 6 digit OTKSL
2. Press the Options soft key and then scroll to Save Phone #. Press the OK soft key.
3. At the NAM display scroll to EDIT and press the OK soft key
4. Display will read NAM and MDN will be highlighted. Press the OK soft key.
5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
6. At the Save prompt press the OK soft key. The next display will show several options that should not edited.
7. Press the EXIT soft key and the device will power cycle.
8. Programming is complete.

Kyosera:
Kyocera 2345 1135
1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming
Kyocera 6035
1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.
Kyocera 3035
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key (Navigation key is the button located between the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the “clear” key (arrow key located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation key
13. Press END. Programming is complete.
Kyocera 2255
1. Press the 1 key six times (111111) “Option will be highlighted
2. Press OK
3. Scroll down to “Programming” and press “OK”
4. Enter OTKSL and press the navigation key
5. “Service Options” will appear scroll down to the “Basic NAM1 Info”
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.

QCP 2035
1. Press 1 six times (111111)
2. Press u key to select OPTIONS
3. Highlight PROGRAMMING and press u key
4. Enter OTKSL
5. ESN will appear press left arrow key to select OK
6. Enter MIN and press ? key
7. Press ? key again to exit - Programming is complete

Sanyo:
Sanyo 4000 4500 4700 5000 6000
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed - press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete
Sanyo 5150 5300 and 6400
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete
Sanyo 6000
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete
Sanyo 4900
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK key.
8. Programming is complete
Sanyo 6200
1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete

All Samsung Secret Codes

Samsung Secret Codes Part 2

#*4773# Incremental Redundancy
#*7785# Reset wakeup & RTK timer cariables/variables
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*7828# Task screen
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen.
#*3849# Restarts Phone
#*7337# Restarts Phone (Resets Wap Settings)
#*2886# AutoAnswer ON/OFF
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*2558# Time ON
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*7326# Accessory
#*7683# Sleep variable
#*3797# Blinks 3D030300 in RED
#*7372# Resetting the time to DPB variables
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*2775# Switch to 2 inner speaker
#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)

Samsung Secret Codes Part 3

*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings

*#7465625# = Check the phone lock status
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

Type
*#9998*627837793# Go to the 'my parameters' and there you will find new
menu where you can unlock phone.(not tested-for samsung C100)
To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .
Java status code: #*53696# (Samsung X600)

If
you want to unlock your phone put a sim from another company then type
*#9998*3323# it will reset your phone. Push exit and then push 7, it
will reset again. Put your other sim in and it will say sim lock, type
in 00000000 then it should be unlocked. Type in *0141# then the green
call batton and it's unlocked to all networks. This code may not work
on the older phones and some of the newer phones. If it doesn't work
you will have to reset your phone without a sim in it by typing
*#2767*2878# or *#9998*3855# (not tested)

WANT MORE? CLICK HERE

Special Tricks,Tips And Secret Codes For Mobile Phones

Nokia Secrets (may works on all models)

Check the IMEI*#06#
Check software version
*#8110#
Sim Clock Stop
*#746025625#
Warranty menu
*#92702689#
Press the following warranty code
6232 (OK) Displays the Month and Year of Manufacture
7332 (OK) Displays the date of the last repairment
7832 (OK) Displays the date where the phone was purchased
9268 (OK) Displays Serial Number
37832 (OK) Set the Purchasing Date MMYY
87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone to another
Hands Free
To
continue an existing call when placing the 8110i into the hands free
car kit without it dropping the call, press the Memory button just
before connecting the cable and placing it in the cradle.
Display extra text in call costs feature
If your network operator doesn't offer a call costs service, you can still make use of
that function to display some personalized text on the screen of your
8110i. Go to Menu, [5], [7], [1], enter PIN2-code and choose Set. Then
type in the limit of the currency units you're using (if the call cost
service worked, you would have to type the cost limit of the calls) and
choose OK. In this case I typed 8110. Then go to the next sub menu
(Menu, [5], [7], [2]), the Show costs in menu. Type in the PIN2 code
again and select Currency. Type in the unit price, in this case number
1. Then type the name of the currency - you can use any string of
letters and numbers 1-3 characters long. then type 2 letter then to
confirm type two names beginning with one of each of the letters. Then
press OK to confirm it.
Quick saving while in call
Saving numbers
to memory during a call If you type a number into your phone during a
call, you will lose it when the call ends. To prevent this happening
just hold down Memory button -- the number will be saved (with no name)
to the next available memory location.
Deleting SMS messages quickly
When reading an SMS message, instead of pressing Option, Erase to delete the message, simply press [C].
Turning lights on temporarily
If
you have display lights turned off, you can turn them on by quickly
pressing and releasing the power button. They will stay on as long as
you are pressing button.

Silent mode temporarily
You can put your phone into silent ringing mode temporarily by pressing Menu then [#].
Closing the cover without ending a call
If you press the menu key and then close the sliding cover during a call you will not end your call.



Nokia 6150 Secrets (also work on other models)


Check the IMEI
*#06#
Service menu
*#92702689#
Show software version
*#0000# or *#6110#
Sim Clock Stop
*#746025625#
Warranty menu
*#92702689#
Press the following warranty code
6232 (OK) Displays the Month and Year of Manufacture
7332 (OK) Displays the date of the last repair
7832 (OK) Displays the date where the phone was purchased
9268 (OK) Displays Serial Number
37832 (OK) Set the Purchasing Date MMYY
87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone to another

Power Button Tip


If
you press the button for a short moment, the menu with the profiles is
shown on the display. If you press one more time, the mobile turns
itself off. You can use the up and down cursor keys to scroll and enable a different alert setting.
The 54# Tip
Type 1#, 2#........54# on the keypad(when you're not in the menu) to get the phone number used for with this key when speed dialing.
Toggle Headset and Auto settings
#1:
Try Connect the pin-out 1-2 (in front from the right.) to toggle
headset settings (The phone will think that you ar using a headset -
"headset" is displayed in the LCD)
#2:Try Connect the pin-out 2-3
(in front from the right.) to toggle auto settings (The phone will
think that you are using it in the car - "auto" is displayed in the LCD)
Call Menu
(In a call) you can press and hold down the menu button for 3 sec. and a menu appears. (transfer, mute etc.)
Quick SMS Typing
When
typing SMS messages, you have to wait some seconds before you can type
the next letter if it is in the same button than the previous one. For
example try to write the word "letter", you have to wait before you can
enter the second "t". A much faster solution is to press the # button
twice and then the letter "t".
The Reboot Trick
1. Go to calendar ( menu - 8 )
2. Make note / reminder
3. Enter some text into the edit box
4. Hold clear until whole text is cleared, then press back
5. Press 0. Main screen is shown but a space appears on the screen. You can't see it of course.
6. Enter 4 digits ( 1234 for example )
7. Use the down arrow to move the cursor to the left side of the numbers and the space (2 times down arrow)
8. Now enter 6 digits and press the green "Call button".
9. Wait some seconds..the phone will now flash the background light and finally reboot.



Philips Genie Secrets (also work on other models)
View the IMEI
*#06#
Status register
*#2254*#
Activate and deactivate the "DEBUG CALL"-Mode
*#2255*#
Time you are connected to the network
*#2558*#
Phone reconnects to the network
*#2562*#
Warm start
*#2565*#
(NO) BLOCKING - list (15 items)
*#3333*#
Init, Flags, SIM LOCK
*#3377*#
Reset the (NO) BLOCKING - list
*#3353*#
Name, Length, SIM phase
*#7378*#
security CODE
*#7489*#
Activate and deactivate the SLEEP MODE
*#7693*#
SPURIOUS INTERRUPT
*#7787*#
Activate the beep signal when the phone is reconnected to the network
*#2337*#



Samsung SGH-600 Secrets (also work on other models)
Show IMEI
*#06#
Show Software Version
*#9999#
Show Software Version (instructions)
*#0837#
Show Serial Parameters
*#0001#
Activates the smiley when charging
*#9125#
Battery status (capacity, voltage, temperature)
*#9998*228#
Program status
*#9998*246#
Change Alarm Buzzer Frequency
*#9998*289#
Debug screens
*#9998*324#
Watchdog
*#9998*364#
EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*377#
Trace Watchdog
*#9998*427#
Change LCD contrast
*#9998*523#
Jig detect
*#9998*544#
Memory status
*#9998*636#
SIm file size
*#9998*746#
SIM Service Table
*#9998*778#
RTK (Run Time Kernel) errors
*#9998*785#
Run, Last UP, Last DOWN
*#9998*786#
Software Version
*#9998*837#
Test Vibrator - Flash the screenligth during 10 seconds and vibration activated
*#9998*842#
Vocoder Reg - Normal, Earphone or car kit can be selected
*#9998*862#
Diag
*#9998*872#
Reset On fatal error
*#9998*947#
Last/Chk
*#9998*999#
Yann debug screen
*#9998*9266#
software version
*#9998*9999#
Changes serial parameters (s=?, f=0,1, t=0,1)
*0001*s*f*t#

Sony CMDZ1 Secrets (also work on other models)

View IMEI
*#06#
Show Software version and manufacture date
# 8377466 #
Alcatel One Touch Secrets
View IMEI Number
*#06#
Enter Service Menu
*#000000#
View Secret Menu
000000 then press *

Sagem RC712 Secrets (also work on other models)

Enter Engineering menu
MENU - 5 - 1 - 1 - #
1) IMEI
2) Flash Eprom etc.
3) ?
4) SP unblock
5) ?
6) Contrast Settings.
When in menu type * and a new menu with new options will appear.

Siemens S1 Secrets (also work on other models)

Show IMEI
*#06#
Tetris
Power
on phone and enter PIN. before phone has locked onto network, F9, send
own number, hit right button, hit 9. left is 2, right is 8, rotate is 5,
and drop is 4.
monitor Mode
Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 5553756, HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu.
Pressing the right Display Button when in monitor mode will show a list of the
six cells with the strongest signals.

Trium MTD30 Secrets (also work on other models)
Monitor mode
Hold C and press 379
Secret menu
Hold C and press 987
Version number
Hold C and press 597
Phase1 and 2
Hold C and press 499
Warm start
Hold C and press 179
Instant turn off
Hold C and press 999
Unlock menu
Hold C and press 787090

Bosch 718 (also work on other models)

Secret Engineering menu (menu 10) appear
*#3262255*8378#
Display the IMEI
*#06#
To set the language automatically (Reset to English)
*#0000#
Set the Enhaced Full Rate
*#3370#
Reset the phone
#3370#
Enter sim lock code
*#9000#
Enter the network code
*#9003#
Enter the subset code
*#9004#
Remove the sim lock permanently
*#9100#
Remove the corporate lock permanently
*#9101#
Remove the provider lock permanently
*#9102#
Remove the network lock permanently
*#9103#
Remove the subset lock permanently
*#9104#



Bosch 738 (also work on other models)
Secret Engineering menu (menu 10) appear
*#3262255*8378#
Display the IMEI
*#06#
To set the language automatically (Reset to English)
*#0000#
Set the Enhaced Full Rate
*#3370#
Reset the phone
#3370#
Enter sim lock code
*#9000#
Enter the network code
*#9003#
Enter the subset code
*#9004#
Remove the sim lock permanently
*#9100#
Remove the corporate lock permanently
*#9101#
Remove the provider lock permanently
*#9102#
Remove the network lock permanently
*#9103#
Remove the subset lock permanently
*#9104#



Bosch COM607 (also work on other models)

Secret Engineering menu (menu 10) appear
*#3262255*8378#
Display the IMEI
*#06#
To set the language automatically (Reset to English)
*#0000#
Set the Enhaced Full Rate
*#3370#
Reset the phone
#3370#
Enter sim lock code
*#9000#
Enter the network code
*#9003#
Enter the subset code
*#9004#
Remove the sim lock permanently
*#9100#
Remove the corporate lock permanently
*#9101#
Remove the provider lock permanently
*#9102#
Remove the network lock permanently
*#9103#
Remove the subset lock permanently
*#9104#



Bosch 908 (also work on other models)

Secret Engineering menu (menu 10) appear
*#3262255*8378#
Display the IMEI
*#06#
To set the language automatically (Reset to English)
*#0000#
Set the Enhaced Full Rate
*#3370#
Reset the phone
#3370#
Enter sim lock code
*#9000#
Enter the network code
*#9003#
Enter the subset code
*#9004#
Remove the sim lock permanently
*#9100#
Remove the corporate lock permanently
*#9101#
Remove the provider lock permanently
*#9102#
Remove the network lock permanently
*#9103#
Remove the subset lock permanently
*#9104#



Bosch 909/909s (also work on other models)
Display the IMEI
*#06#
Set the language automatically
*#0000#
Set the Enhanced Full Rate
*#3370#
Reset the phone
#3370#
Enter sim lock code
*#9000#
Enter the network code
*#9003#
Enter the subset code
*#9004#
Remove the sim lock permanently
*#9100#
Remove the corporate lock permanently
*#9101#
Remove the provider lock permanently
*#9102#
Remove the network lock permanently
*#9103#
Remove the subset lock permanently
*#9104#

Ericsson 688 Secrets (also work on other models)

Check the IMEI (International Mobile Equipment Identity)
*#06#
Reset the phones menu-language to English.
*#0000#
Check the software release information
>*<<*<*
Shortcut for Last Dialed call menu If you for some reason don't want to
enter the 'Last Dialed calls menu' by using the 'YES' key you can use
the following key stroke instead: First '0' then '#'. Bat. level
indicator when turned OFF... When the gh688 is turned off and the phone
is not changing - the bat. level can be seen for a short period of time
by pressing the 'NO' key quick once (it has to be quick!) and then wait
for about 2 sec. The bat. level will now be shown in the display at its
normal position. Access menu without Sim card To access to the menu in
your phone without having a card inside do the following: type
**04*0000*0000*0000# When display say "Wrong Pin" press NO and you have
access to the all menus: Info, Access, Settings, Calculator, Clock,
Keylock On?, Mail, Phone book. NOTE: If you try this on the GH688 your
phone may stop at Keylock On? menu and you´ll have to take your battery
out to turn the phone on again. Full Network Name You can see the Full
Network Name by doing the following: Go to the network menu, when the
phone displays the networks available (in 'Select net' and 'Edit list'
menu) you can press * and you will see the full name. Full Operator
List You can view the full operator list by doing the following: Go to
the 'Edit list' menu under 'networks'. The phone say 'please wait'(searching for other networks). When finished, Press the <> keys.
How to enable net monitor on Ericson 688
1. Remove SIM from phone
2. Dial 112, press YES, hear something,
3. Dial 112YESNO
4. Press <>Ericsson 628 Secrets (also work on other models)
Check the IMEI (International Mobile Equipment Identity)
*#06#
Reset the phones menu-language to English.
*#0000#
To see the time and date
*#103#
Check the software release information
>*<<*<*
Shortcut for Last Dialed call menu If for some reason you don't want to
enter the 'Last Dialed calls menu' by using the 'YES' key you can use
the following key stroke instead: First '0' then '#'. Battery level
indicator when turned OFF When the phone is turned off and the phone is
not changing - the battery level can be seen for a short period of time
by pressing the 'NO' key quick once (it has to be quick!) and then wait
for about 2 sec. The battery level will now be shown in the display at
its normal position. Access menu without Sim card To access to the menu
in your phone without having a card inside do the following: type
**04*0000*0000*0000# When display say "Wrong Pin" press NO and you have
access to the all menus: Info, Access, Settings, Calculator, Clock,
Keylock On?, Mail, Phone book. Alarm Clock Menu Go to MissedCall Empty
the list Press the -> key for a second or two
The option Menu size turns up
Choose 'yes' and go from there.

You can make free phone calls with GA628 (also work on other models)

NOTE: This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some software versions.
The prepaid GSM SIM CARD is a kind of "SIM card" which only has a certain amount of credit on it.
Here's
the trick: Dial the number normally and press YES. While "connecting"
is shown on the screen, the following procedure should be carried out:
Press
CLR then 0 then # and then NO (twice) so as to switch OFF the phone.
You can then still speak on the phone while it is switched off but the
SIM card does not record your calls which will lead to FREE phone calls
in some countries.. I hope!!

Motorola Flare Secrets (also work on other models)

View IMEI Number
*#06#
RBS
Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.
De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This only works with some versions of software.
What's the use of RBS
Get Distance From base station- Place a call, when it is answered, press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is a number.
Multiply this number by 550, and the result is the distance from the
RBS (Radio Base Station), in meters.
Get Signal Quality - press
[MENU] until 'Eng Field Option' is displayed, press [OK], select
'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5 seconds, a new
cell is selected.

NEC DB2000 Secrets (also work on other models)
See IMEI code
*#06#
Reset to defaults
*73738#
Show Software version
*#2820#
SP Lock info
The procedure will show if your phone is locked.
*#3210# for SIM lock info,
*#8140# for Net lock info.
SIM lock
*#4960 # - Inquiry * 4960 * password * password # (send?) to Lock
#4960* password # to Unlock
[password] is an 8 digits number
Net Lock
*#7320# - Inquiry * 7320 * password * password # to Lock.
#7320* password # to Unlock.
[password] is an 8 digits number
Net Lock 2
*#2220# - Inquiry * 2220 * password * password # to Lock
#2220* password # to Unlock
[password] is an 8 digits number
ü Subnet Lock
*#1110# - Inquiry * 1110 * password * password # to Lock
#1110* password # to Unlock [password] is an 8 digits number

Make Calls To Even Mobile Phones In India Absolutely Free

VISIT :
www.jaxtr.com

REGISTER YOURSELF. YES, ITS
ABSOLUTELY FREE. ADD YOUR PHONE NUMBER, YOU WILL GET A CALL AND YOU CAN
VERIFY IT. AFTER THAT JUST VISIT YOUR LINK, ENTER YOUR FRIENDS PHONE
NUMBER AND HAPPY TALKING.

PROS :
YOU CAN CALL ANYWHERE ALL OVER THE WORLD, EVEN THE CELLPHONES THAT INCLUDES COUNTRIES LIKE INDIA.

YOU GET 16 MINUTES TO TALK ON ONE ACCOUNT.

YOU CAN HAVE UNLIMITED VOICE MAILS

CONS :
YOU CANNOT DAIL THE SAME NUMBER AGAIN

NO NEED TO BE SAD FOR THAT, YOU CAN ALWAYS DELETE YOUR NUMBER IN THE PRESENT ACCOUNT, AND REGISTER FOR A NEW ACCOUNT.

True Phone Develops VOIP Client For Apple iphone

VoIP on iPhone-
it is something both iPhone and VoIP customers demanding, ever since
Apple launched the high profile device in USA. Thanks to Truphone, the
VoIP world will finally embrace Apple iPhone.



Truphone has just launched an alpha version of its software that would enable SIP-compatible VoIP to work seamlessly on the iPhone.

The MVoIP service provider is planning for a private beta in the next four weeks.

The
TruPhone VoIP solution needs Terminal commands through the iPhone to
use the iPhone�s SIP-stack to make phone calls through WiFi rather than
the SIM card. The company will make the application simple and
user-friendly when it will be released officially.

Truphone
claims that its VoIP application will ensure Apple iPhone users to
enjoy calls at considerably lower rates than those charged by the
mobile operators.

Check Point All Set To Block SKYP 3.5

Blocking Skype in a corporate networking is not an easy task despite constant efforts led by security leaders. If Check Point Software Technologies
succeeds, then the business enterprises will have a reason to feel
good, for they can access to basic communication services in a secure
way.

Check Point has launched its
latest gateway products to block Skype 3.5 traffic in a corporate
networking. Using Check Point products, the business enterprises can
build up a secure networking against the virus by simply blocking Skype
use until the virus storm has passed, or limiting use to versions not
affected.

Over the years, Skype has dominated the VoIP market
for its popular Instant Messaging, Voice and Video Conferencing
services. The P2P VoIP client has played a major role in breaking the
communication gap in corporate network.

At the same time, it has carried out a number of worms. The latest worm we have discussed here is the Ramex.A or Pykse, which spreads by sending a Skype IM to other users asking them to click on a link designed to infect the receiving system.

In this context, I can say blocking Skype is very difficult.

That�s why Check Point warns business enterprises,

IM,
Skype and P2P applications are exciting ways to communicate and
collaborate, but enterprises must have control over anything with the
potential to introduce new threats into the network